I’d like to thank Nathan and the team at Wendy’s Broadcadst for all their help. They have been supplying me with custom cables, made to the highest standard over many year. The low profile connectors are hard to find, yet they normally ship the finished leads the day after ordering, often to studios or locations where I am filming and I’ve never had to ask for any adjustments or corrections; They are right first time, despite my requiring some unusual bespoke wiring. I’ve also benefited from real world advice about products and fault finding. Wendy’s Broadcast have made location sound far less stressful.
Rode TF-5 Matched Pair
The TF-5 represent a new standard in small diaphragm condensers. The all-new capsule is engineered to sub-micron tolerances, giving unprecedented consistency of tone and response.
The TF-5 features the hallmark clarity and airiness of other RØDE small diaphragm mics, and adds to this a unique warmth of tone which is often lacking in smaller ‘pencil mics’ of this type, making the TF-5 uniquely versatile.
Features:
| Acoustic Principle |
Externally biased condenser
|
| Active Electronics |
JFET impedance converter with bipolar output buffer
|
| Polar Pattern |
Cardioid
|
| Frequency Range |
20Hz - 20kHz
|
| Frequency Response |
30 Hz - 20 kHz ±3dB // 20 Hz - 20 kHz ±4dB
|
| Output Impedance |
63Ω
|
| Signal to noise Ratio |
80 dB
|
| Equivalent Noise |
14 dB SPL
(A-weighted, as per IEC651) |
| Input SPL @ 1% THD |
135 dB SPL (1kHz @ 1% THD, 600Ω load)
|
| Sensitivity |
-29 dB re.1 Volt/Pascal or better (35 mV @ 94dB SPL @ 1kHz)
|
| Dynamic Range |
112.6 dB (1kHz @ Max SPL)
|
| Power Requirements |
7mA @ 48V phantom power
|
| Weight (g) |
114g (single microphone)
|
| Dimensions |
Length: 98.7mm Diameter: 20mm
|